Fluorinated styrene-based monomers for cyclopolymerizations

The synthesis of versatile fluorine compounds and monomers for conducting polymer research and cyclopolymerizations is presented. Semiprotected 2,3,5,6-tetrafluoroterephthaldehyde 1 could be elaborated through Wittig olefination chemistry, deprotection and reduction to the previously unknown 4-vinyl-2,3,5,6-tetrafluorobenzylalcohol 8 in good yields. Compound 8 can be reacted to form the malonate ester, and then alkylation on the malonate moiety in mild conditions affords difunctional monomer 3. Through sequential esterifications on the malonate moiety, and subsequent alkylation, compound 4, a difunctional monomer for cyclopolymerization bearing one styrene and one perfluoroaryl styrene moiety, has been obtained. Preliminary experiments show that it is possible to cyclopolymerize 4 under free radical conditions.     

Synthesis of polysiloxane xerogels with fluorine-containing groups in the surface layer and their sorption properties

Hydrolysis and polycondensation reactions of tetraethoxysilane (TEOS) with 3,3,3-trifluoropropyl-trimethoxysilane (TFMS) or 1H,1H,2H,2H-perfluorooctyltriethoxysilane (PFES) were used to synthesize xerogels functionalized with fluorine-containing groups. According to transmission electron microscopy, the skeletons of synthesized polysiloxane xerogels have globular structures and consist of agglomerates of particles with fluorinated groups on their surfaces. FTIR spectroscopy showed that primary xerogel particles possess spatial polysiloxane networks, with fluorinated groups along with silanol groups and water in the surface layer. According to thermal analyses, the water content was 3–8 wt.%, and it decreased with increasing length of the fluorinated chain. Thermal destruction of the surface layer starts above 300 °C. The sorbents that were obtained were predominantly mesoporous materials with well-developed porous structures (S_BET = 400–960 m² g⁻¹, V_s = 0.66–0.93 cm³ g⁻¹). The influence of the TEOS/functional silane ratio and the natures of the functional groups on the structural and adsorptive properties were shown. The samples synthesized are organophilic. The affinity for n-hexane increases with increasing length of the fluorine-containing chain (PFES) and the content of fluorinated groups in the surface layer. The hybrid organic–inorganic materials that were obtained can be used for adsorption of hydrocarbons, including oil, from water.     

A simple route to side-chain fluorinated β-lactams from ring-fluorinated aziridines

β-Lactams bearing a Ph₂CF substituent at the C(4)-atom were synthesized from N-alkyl-2-fluoro-3,3-diphenylaziridines. The transformation was realized using SbF₃-mediated isomerization of the monofluoroaziridines to fluorinated aldimines, followed by Staudinger reaction with ketenes. It was shown that this reaction sequence can be performed as a one-pot procedure.     

微波作用下卤素交换氟化制备氟代苯甲醛及二苯甲酮类化合物

在微波作用下,采用高效催化剂体系,于中等极性非质子溶剂中经卤素交换氟化高效制备了系列含氟芳香醛(酮)类化合物,产品收率53·3%~92·6%,反应时间较常规加热最多可缩短80%以上。采用中等极性反应溶剂,还可突出表现出微波对反应促进的“非热效应”,从而大大拓宽了氟化反应溶剂的选择范围。     

Influence of curing temperature on the optical properties of fluorinated polyimide thin films

The influence of curing temperature (CT) on the optical properties of 6FDA/ODA poly(amic acid)-polyimide (PAA-PI) films was characterized by measuring ATR-FT-IR spectra, refractive index (RI) and birefringence of the films. The results showed that the infrared absorption intensity of characteristic peaks (IAICP) corresponding to the imide ring and the RI of PAA-PI films reached their maxima when the films had been cured at 270 °C, while the magnitude of birefringence (|Δn|) of the films reached its minimum as CT rose up to 330 °C. However, the RI decreased as CT was between 270 °C and 330 °C. Both the RI and |Δn| of the film increased obviously when CT increased after 330 °C. We think this is due to the interchain crosslink reaction (ICCR) above 330 °C and can be an evident proof of ICCR. And the evidences supporting ICCR was also discussed via IR differential spectra.     

氨及其氟取代物与氟化氢形成氢键络合物的系列理论研究

采用ａｂ ｉｎｉｔｉｏ方法，在６－３１Ｇ水平上，对ＮＨ３…ＮＦ、ＮＨ２Ｆ…ＨＦ、ＮＦ３…ＨＦ４种氢键络合物的５组构型进行了一系列能量梯度法的构型优化和能量计算，取得到关于这些分子络合物的结构特征，氢键键能与键级，单体电荷迁移量等信息，分析，比较得出了在每种构型下各体系的重要物理量随氟基数的递变规律，并探讨了氟基的诱导效应对上述体系氢键作用的影响。     

Organosoluble,low dielectric constant and highly transparent fluorinated pyridine-containing poly(ether imide)s derived from new diamine: 4-(4-trifluoromethyl)phenyl-2,6-bis[4-(4-amino-2-trifluoromethylphenoxy)phenyl]pyridine

A new aromatic diamine, 4-(4-trifluoromethyl)phenyl-2,6-bis[4-(4-amino-2-trifluoromethylphenoxy)phenyl]pyridine, was synthesized by a modified Chichibabin reaction of 4-(4-nitro-2-trifluoromethylphenoxy)acetophenone with 4-triflouromethylbenzaldehyde, followed by catalytic reduction. A series of fluorinated pyridine-containing aromatic poly(ether imide)s (PEIs) were prepared from the diamine monomer with various aromatic dianhydrides via conventional two-step thermal imidization method. The resulting PEIs had inherent viscosities values of 0.68–0.90 dL/g, and could be cast and thermally converted into transparent, flexible, and tough polymer films. These PEIs were predominantly amorphous, had good solubility in common solvents such as NMP, DMAc and m-cresol at room temperature, and displayed excellent thermal stability with the glass transition temperatures of 258–315?°C, the temperatures at 5% weight loss of 550–585?°C, and the residue of higher than 55% at 750?°C in nitrogen. Moreover, the PEIs films showed outstanding mechanical properties with tensile strengths of 74.8–103.5?MPa, tensile moduli of 1.08–1.45?GPa, and elongations at break of 10.6–24.4%. These PEIs also exhibited low dielectric constants of 2.81–2.98 (1?MHz) and water uptake 0.39–0.68%, as well as high optical transparency with the UV cutoff wavelength in the 350–378?nm range and the wavelength of 80% transparency in the range of 412–510?nm.     

The physical properties of alkene-terminated liquid crystal molecules/E8 mixture and the electro-optical properties as they doped in polymer-dispersed liquid crystal systems

Effects of the content of fluorinated alkene-terminated liquid crystal (LC) molecules on the physical properties of the fluorinated alkene-terminated LC/E8 mixture were studied. The morphology and electro-optical properties as they doped in polymer-dispersed liquid crystal (PDLC) films were investigated. The detailed discussion of the obtained results is given. As a result, comparing with the physical properties of the series of LC mixtures with the same content of the analogous fully saturated compounds doped with E8, we find that the birefringence is significantly larger for the LC mixture with the alkene-terminated materials. Both fluorinated alkene-terminated LC molecules and the analogous fully saturated compounds doped with E8 reduce the driving voltage of PDLC films. Moreover, PDLC films with the fluorinated alkene-terminated LC molecules possessed higher contrast ratio and faster response time than that of the PDLC films prepared by adding the same mass fraction of the analogous fully saturated compounds. Thus, the ability to manipulate physical properties of LC mixture and electro-optical properties of PDLC films by changing the LC molecular structures may have future relevance for new LC structures design and applications of PDLC films.     

Cycloadditions between methyl (Z)-2-bromo-4,4,4-trifluoro-2-butenoate and various tosylacetamides: Synthesis of trifluoromethylated pyroglutamates and 2-pyridones derivatives

Cycloaddition reactions between methyl (Z)-2-bromo-4,4,4-trifluoro-2-butenoate and various 2-tosylacetamides are described. Various 2-tosylacetamides react with methyl (Z)-2-bromo-4,4,4-trifluoro-2-butenoate in the presence of NaH at room temperature in one step to form trifluoromethylated pyroglutamates as single diastereomers. However, employing the same reactants using t-BuOK as base at ?78?°C results in the formation of trifluoromethylated 2-pyridones. A ring-closure mechanism is proposed for the reaction.